Description
200 watt maximum power output (PEP) 50 watts more than our DX95T2 After Tune-up : Variable AM = 6W - 60W peak power 260W SSB PEP = 200W Power cord using an quick disconnect, 8 gauge wire and an AGU gold plated 50 amp fuse New larger bottom heat sink with two internal fans Blue LEDs for frequency and channel readouts Blue meter lamp on our signature large meter StarLite faceplate (backlit) Red modulation LED under the meter Side mic jack AM/USB/LSB modes Variable power output control Variable receive gain control Variable dimmer control for LEDs, meter lamp and faceplate lettering Switch to turn off the frequency digits Variable Talkback circuit with on/off switch Echo and Voice Changer with controls on the front panel Roger Beep with on/off switch Automatic SWR circuit Standard clarifier circuit - no on/off switch Same main PC board as the DX95T2 Shipping weight is 14 lbs. TWO YEAR GALAXY WARRANTY GENERAL Frequency Range 28.315 ~ 28.755 MHz Emission AM/USB/LSB Frequency Control Phase-Lock-Loop (PLL) Synthesizer Frequency Stability 0.001% Temperature Range -30°C to +50°C Antenna Impedance 50 Ohms Antenna Connectors Standard SO-239 type Input Voltage 13.8V DC Size 7 7/8" (W) x 3 1/8" (H) x 10 3/4" (D) Weight 10 lbs. TRANSMITTER RF Power Output AM: 10W~50W USB/LSB: 200W PEP Current Drain AM: 25 Amps SSB: 40 Amps (BS) Local testing shows: AM 5 - 50w carrier: 22 - 44 Amps SSB 60-220W PEP: 45 - 66 Amps Spurious Emission -50 dB Unwanted Sideband -50 dB Audio Distortion 10% Frequency Response 300 to 2500Hz Microphone Dynamic Clarifier Range Coarse: ± 6.0KHz, Fine: ± 1.0KHz RECEIVER Sensitivity for 10 dB (S+N)/N AM: < 0.5 ìV; USB/LSB: < 0.25 ìV Squelch Sensitivity < 0.5 uV Selectivity -55 dB Image Rejection -50 dB AGC Figure of Merit 100 mV for 10dB Change in Audio Output Audio Power Output 2.5W @ 10% Distortion Audio Response 300 to 2500 Hz