Home > Communication Electronics > Microphones > Delta
Sort By:
Page of 1
DELTA EC2 CB ECHO BOARD TURBO ECHO PROFESSIONAL IC for CB RADIO 2" x 2" SIZE
DELTA EC2 CB ECHO BOARD TURBO ECHO PROFESSIONAL IC for CB RADIO 2" x 2" SIZE
Our Price: $19.95

Introducing to the market the
Brand New
Delta Electronics EC2 ECHO BOARD!!

From the same designer and makers of the widely acclaimed Delta M2 microphones is the newest, most innovative Echo Board ever brought to market! No echo board is as simple to install with only 4 wires for connection into ANY RADIO!!! Unmatched Echo sound giving you that BIG BOOMING THEATER ECHO SOUND!!


Its Micro Size at only 2 inches x 2 inches is so small it can easily be put into ANY RADIO!! Simply wire up 4 WIRES to your mobile or base radio and experience ECHO that will make you sound like you were transmitting from the Grand OLE Oprey!!!

Wire to RED, BLACK, Audio IN and Audio OUT and your all done!! With the included dual knob mounted on your radio you can shut off and control the echo. On the board is a red LED that will light when power is given confirming you've installed it all correct!

FEATURES:

* Dual Controls Of Timing & Repeat
* Easy To Install In Almost Any Radio
* Simple Install Instructions Included - Connects Directly To 12 VDC, Ground, Audio In and Audio Out
* Adjustable From A Simple Big Room Base Radio Sound To FAST Repetitive Repeats!
* Metal Mounting Bracket On Side.
* Small 2" x 2" Size Won't Clutter Radio and easy to stash inside radio chassis!
* Standard Components For EZ Repair - Not SMT
* Clear Voice Technology Sound.
* No Complicated Assembly or Adjustments Needed


SHIPS USPS WITH FREE SHIPPING!!!
more info
DELTA EC1 DYNAMIC MIC AMPLIFIER / ECHO CHAMBER w/ ROGER BEEP 4 pin Cobra CB
DELTA EC1 DYNAMIC MIC AMPLIFIER / ECHO CHAMBER w/ ROGER BEEP 4 pin Cobra CB
Our Price: $69.95

Introducing to the market the
Brand New
Delta Electronics EC1 Dynamic Microphone Amplifier Box with TURBO Echo and Roger Beep!!

Meticulously designed and created by a radio technician with 40 years of experience with the sole focus of bringing LOUD and Crystal Clear audio to ANY MICROPHONE, whether its your basic stock mic or your tired old power mic! The same people that brought the acclaimed DELTA M2 microphone!!

Plug your 4 pin mic right into the front and the EC1 will AMPLIFY your mic's audio to levels you never thought it could achieve! Add to it the EC1 Echo capability to give you that BIG BOOMING THEATER ECHO SOUND! All adjustable from its two front knobs for TURBO ECHO and Delay! Add also a on/off for ROGER BEEP!! Unkey that mic and you will hear the Roger Beep confirmation!

Small in size with a 12vdc cable included! Simply wire up with your mobile or base radio and experience audio you didn't think was possible outside of super expensive radios or mics!

Don't think of this as simply a Echo Chamber, that would make it too simplistic, its mic audio amplification is unlike anything else on the market and add with it the ROGER BEEP and the EC1 is in a class all on its own!

If you are unsure if your particular radio or mic is compatible with this unit please do not hesitate to message us! We will respond ASAP!!

SHIPS USPS PRIORITY 2-3 day FREE SHIPPING!!!


Radio comes factory wired 4 pin Cobra with a 3ft 4 conductor shielded coil cord.

*Will not work with 4 pin stock condenser microphones (ex. Uniden 520/510 stock mics)
*No Roger beep function for 4 pin cobra 148's
more info
Delta Electronics M2 Chrome Amplified Powered Base CB HAM Microphone
Delta Electronics M2 Chrome Amplified Powered Base CB HAM Microphone
Our Price: $139.00

Introducing to the market the Brand New Delta Electronics M2 Amplified Dynamic Desk Microphone!!
Meticulously designed and created by a radio technician with 40 years of experience with the sole focus of LOUD and Crystal Clear audio from a classically designed Powered microphone head with a heavy duty metal housing for industrial, Ham and CB radio applications as its main focus.

What has been missing in the market is a new approach to the classic sound we used to get from the D104, Turner and Echomaster microphones of the past. This New M2 Powered Desk Microphone is that new approach, giving the loudest and clearest sound of any microphone on the market today!!!

Outfitted with a CHROME finished Die Cast Cardioid Dynamic microphone head and a simple push to talk button with slide locking capabilities on a heavy duty metal base. TONE and MODULATION are easily adjusted right at the base with the turn of the knobs allowing for easy adjustment and fine tuning for just that perfect sound your looking for!! The VOICE TONE control knob allows the technician the ability to adjust the bass tone and high tones getting the sound exactly the way you want it transmitted!!

Perfect for the meticulous Ham and CB operator looking for the BEST microphone to pair with their radio!!!

The VU meter allows you to see your modulation swing as you talk away on your rig! 9 volt battery not included. The ON/OFF switch on the neck of the mic is also perfect for quick STANDBY MODE.

NOW COMES WITH 9VDC POWER SUPPLY!! Now you can plug right into the wall or use 9VDC battery, option is yours! No other base mic on the market has this feature!!
Radio comes factory wired 4 pin Cobra with a 3ft 4 conductor shielded coil cord.
  • Standard PTT "Push-to-talk" and "Lock-To-Talk" buttons
  • High quality amplified Die Cast Mic
  • Five conductor shielded, standard astatic color coded cable with 4-pin (standard Cobra/Galaxy wiring) connector
  • Tone and Modulation sliders
  • Stand By on/off switch
  • Modulation VU meter
  • Impedance:270 Ohms
  • Frequency Response: 40-15000kHz
  • Output Level: -44dB below 1.5V at 1 Mega Ohm Impedance
  • Output Adjustment: Approximately 40 dB Range
  • Output Impedance: 5 KOhms
  • Requires 9 volt battery (not included)
more info
Delta Electronics M2 Gold Amplified Powered Base CB HAM Microphone
Delta Electronics M2 Gold Amplified Powered Base CB HAM Microphone
Our Price: $139.00

Introducing to the market the Brand New Delta Electronics M2 Amplified Dynamic Desk Microphone in the limited edition GOLD!!
Meticulously designed and created by a radio technician with 40 years of experience with the sole focus of LOUD and Crystal Clear audio from a classically designed Powered microphone head with a heavy duty metal housing for industrial, Ham and CB radio applications as its main focus.

What has been missing in the market is a new approach to the classic sound we used to get from the D104, Turner and Echomaster microphones of the past. This New M2 Powered Desk Microphone is that new approach, giving the loudest and clearest sound of any microphone on the market today!!!

Outfitted with a GOLD finished Die Cast Cardioid Dynamic microphone head and a simple push to talk button with slide locking capabilities on a heavy duty metal base. TONE and MODULATION are easily adjusted right at the base with the turn of the knobs allowing for easy adjustment and fine tuning for just that perfect sound your looking for!! The VOICE TONE control knob allows the technician the ability to adjust the bass tone and high tones getting the sound exactly the way you want it transmitted!!

Perfect for the meticulous Ham and CB operator looking for the BEST microphone to pair with their radio!!!

The VU meter allows you to see your modulation swing as you talk away on your rig! 9 volt battery not included. The ON/OFF switch on the neck of the mic is also perfect for quick STANDBY MODE.

NOW COMES WITH 9VDC POWER SUPPLY!! Now you can plug right into the wall or use 9VDC battery, option is yours! No other base mic on the market has this feature!!
Radio comes factory wired 4 pin Cobra with a 3ft 4 conductor shielded coil cord.
  • Standard PTT "Push-to-talk" and "Lock-To-Talk" buttons
  • High quality amplified Die Cast Mic
  • Five conductor shielded, strandard astatic color coded cable with 4-pin (standard Cobra/Galaxy wiring) connector
  • Tone and Modulation sliders
  • Stand By on/off switch
  • Modulation VU meter
  • Impedance:270 Ohms
  • Frequency Response: 40-15000kHz
  • Output Level: -44dB below 1.5V at 1 Mega Ohm Impedance
  • Output Adjustment: Approximately 40 dB Range
  • Output Impedance: 5 KOhms
  • Requires 9 volt battery (not included)
more info
Delta Electronics M2 Black Chrome Amplified Powered Base CB HAM Microphone
Delta Electronics M2 Black Chrome Amplified Powered Base CB HAM Microphone
Our Price: $139.00

Introducing to the market the Brand New Delta Electronics M2 Amplified Dynamic Desk Microphone!!

Meticulously designed and created by a radio technician with 40 years of experience with the sole focus of LOUD and Crystal Clear audio from a classically designed Powered microphone head with a heavy duty metal housing for industrial, Ham and CB radio applications as its main focus.

What has been missing in the market is a new approach to the classic sound we used to get from the D104, Turner and Echomaster microphones of the past. This New M2 Powered Desk Microphone is that new approach, giving the loudest and clearest sound of any microphone on the market today!!!

Outfitted with a BLACK CHROME finished Die Cast Cardioid Dynamic microphone head and a simple push to talk button with slide locking capabilities on a heavy duty metal base. TONE and MODULATION are easily adjusted right at the base with the turn of the knobs allowing for easy adjustment and fine tuning for just that perfect sound your looking for!! The VOICE TONE control knob allows the technician the ability to adjust the bass tone and high tones getting the sound exactly the way you want it transmitted!!

Perfect for the meticulous Ham and CB operator looking for the BEST microphone to pair with their radio!!!

The VU meter allows you to see your modulation swing as you talk away on your rig! 9 volt battery not included. The ON/OFF switch on the neck of the mic is also perfect for quick STANDBY MODE.

NOW COMES WITH 9VDC POWER SUPPLY!! Now you can plug right into the wall or use 9VDC battery, option is yours! No other base mic on the market has this feature!!

Radio comes factory wired 4 pin Cobra with a 3ft 4 conductor shielded coil cord.
  • Standard PTT "Push-to-talk" and "Lock-To-Talk" buttons
  • High quality amplified Die Cast Mic
  • Five conductor shielded, strandard astatic color coded cable with 4-pin (standard Cobra/Galaxy wiring) connector
  • Tone and Modulation sliders
  • Stand By on/off switch
  • Modulation VU meter
  • Requires 9 volt battery (not included)
  • Impedance:270 Ohms
  • Frequency Response: 40-15000kHz
  • Output Level: -44dB below 1.5V at 1 Mega Ohm Impedance
  • Output Adjustment: Approximately 40 dB Range
  • Output Impedance: 5 KOhms
more info