Home > Car Audio > Amplifiers > Mono Amplifiers
Choose a sub category:
Orion Car Amplifiers Zapco Car Amplifiers
Sort By:
Page of 2
Kicker ZX750.1 750W RMS, Class D Monoblock ZX Series Amplifier (ZX7501)
Kicker ZX750.1 750W RMS, Class D Monoblock ZX Series Amplifier (ZX7501)

Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-206 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make then compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.

Kicker FIT Fail Safe Integration Technology

Kicker Fail Safe Technology (FIT):

Kicker has manufactured a new Fail-Safe Integration (FIT) technology into all of their amplifiers. The FIT technology uses isolated differential inputs in order to reject noise or electrical interferences, caused by engines, alternators or any other audio or video component throughout your vehicle. The differential inputs will use a muting circuit that will block out any additional noise that may stream down the line. The FIT technology will help created the cleanest and purest sound possible for any audio system. The Kicker FIT technology is setting the standard for high quality sound.


  • ZX Series Class D Monoblock Car Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 375 watts x 1 chan.
    • 2 ohms: 750 watts x 1 chan.
  • High efficiency MOSFET power supply
  • LED power and protection indicators
  • Remote bass level included
  • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
  • Preamp RCA outputs
  • Muting circuit cancels out unwanted noise
  • FIT (Fail-Safe Integration Technology) utilizes differential inputs to reject noise and electrical interference for the quietest operation possible and ultimate audio clarity
  • Boost, gain, and crossover frequencies are top-mounted for easy access
  • Balanced differential inputs for noise elimination and factory-radio compatibility
  • 3 Automatic turn-on modes (remote, DC offset, signal sense)
  • Optional edgy vinyl skins for personalizing heat sinks available
  • Optional endcaps are available for all ZX amplifier models
  • High-density convection heat sink for extreme heat dissipation
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable low-pass filter (50-200 Hz, 24 dB/octave)
  • High-pass subsonic filter (24 dB at 25 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 25-200 Hz
  • Dimensions: 14-11/16"L x 9-5/8"W x 2-1/8"H
  • Actual power exceeds rated power, documented inside each carton
  • 4-gauge power and ground leads recommended.
more info
Kicker ZX1000.1 1000W RMS, Class D Monoblock ZX Series Amplifier (ZX10001)
Kicker ZX1000.1 1000W RMS, Class D Monoblock ZX Series Amplifier (ZX10001)

Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-206 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make then compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.

Kicker FIT Fail Safe Integration Technology

Kicker Fail Safe Technology (FIT):

Kicker has manufactured a new Fail-Safe Integration (FIT) technology into all of their amplifiers. The FIT technology uses isolated differential inputs in order to reject noise or electrical interferences, caused by engines, alternators or any other audio or video component throughout your vehicle. The differential inputs will use a muting circuit that will block out any additional noise that may stream down the line. The FIT technology will help created the cleanest and purest sound possible for any audio system. The Kicker FIT technology is setting the standard for high quality sound.


  • ZX Series Class D Monoblock Car Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 1000 watts x 1 chan.
  • High efficiency MOSFET power supply
  • LED power and protection indicators
  • Remote bass level included
  • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
  • Preamp RCA outputs
  • FIT (Fail-Safe Integration Technology) utilizes differential inputs to reject noise and electrical interference for the quietest operation possible and ultimate audio clarity
  • Muting circuit cancels out unwanted noise
  • Boost, gain, and crossover frequencies are top-mounted for easy access
  • Balanced differential inputs for noise elimination and factory-radio compatibility
  • 3 Automatic turn-on modes (remote, DC offset, signal sense)
  • Optional edgy vinyl skins for personalizing heat sinks available
  • Optional endcaps are available for all ZX amplifier models
  • High-density convection heat sink for extreme heat dissipation
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable low-pass filter (50-200 Hz, 24 dB/octave)
  • High-pass subsonic filter (24 dB at 25 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 25-200 Hz
  • Dimensions: 16-3/4"L x 9-5/8"W x 2-1/8"H
  • Actual power exceeds rated power, documented inside each carton
  • 1/0-gauge power and ground leads recommended.
more info
Zapco SLDIN.18 SymbiLink Din Cable
Zapco SLDIN.18 SymbiLink Din Cable
Our Price: $35.00

SymbiLink cables allow you to connect ZAPCO audio components and convert a standard unbalanced audio signal into the fully balanced domain usually only reserved for the type of expensive professional equipment found in recording studios or at your local concert venue. With this type of cabling in your component system it virtually becomes immune to electrical interference in the surrounding environment and much less susceptible to signal degradation over long cable runs. It is for this reason that balanced signal cables are common in professional or industrial applications. ZAPCO has made this technology available for your car. ZAPCO engineers also discovered that a significant amount of low frequency distortion was caused by the pulsating DC current in the automobile chassis, and amplifier power wiring. ZAPCO's balanced SymbiLink technology completely eliminates this distortion.
  • 18 foot long SymbiLink cable
  • DIN to DIN connectors
more info
Zapco DRC-SL In dash Digital Remote Control/Programmer/Display
Zapco DRC-SL In dash Digital Remote Control/Programmer/Display
Our Price: $250.00

Full on-board DSP is a wonderful function, but only if you can control it. ZAPCO® provides 2 forms of control. First and quickest is through a PC with the ZAPCO® DPN program. The other is through the DRC-SL in dash Programmer/Display. Realistically, a PC will not be available at all times. The DRC-SL puts full control of all DSP functions right in the dash for 27/7 programming access.

The “Joy Stick” type control allows you to navigate through the network to access control of individual amplifiers in a system, and also to access all DSP functions with a right/left tap. Once you select the function you adjust values of the functions with an up/down tap. All settings and functions are displayed on the top two lines of the Graphical LCD Display and the bottom row has continuous prompts for the current setting so you never have to look for a manual to jog your memory.
more info
Lanzar Opti Scion OPTS140.1D 1480 Watt Mono Block Competition Amplifier
Lanzar Opti Scion OPTS140.1D 1480 Watt Mono Block Competition Amplifier
Our Price: $260.00

  • 1 x 550W RMS at 4 OHMS
  • 1 x 900W RMS at 2 OHMS
  • 1 x 1480W MAX at 1.3 OHMS
  • Frequency Response: 15Hz-150Hz
  • Input Sensitivity (Subsonic): 15Hz-40Hz, 24dB
  • Input Sensitivity (Low Level): 50Hz-150Hz, 24dB
  • Signal-to-Noise Ratio: >90dB
  • THD at 1Watt, 4Ohm: <0.5%
  • Mono Block Subwoofer Amplifier
  • 1 Ohm Stable
  • MOSFET Power Supply
  • Nickel Plated RCA Inputs
  • Custom Terminal Block for Speaker Connections
  • Phase Control 0-180 degree
  • Heavy Duty Power Coated Heat sink
  • Power and Protection LED Indicators
  • Soft Turn-on/Turn-off
  • Dimensions: 9.40'' (W) x 2.32'' (H) x 17.55'' (L)
Product Manual: Click Here
more info
Zapco DC500.1 DC Reference Mono Channel Amp with On-Board Digital Processing
Zapco DC500.1 DC Reference Mono Channel Amp with On-Board Digital Processing
Our Price: $275.00

Mono, 4 ohms: 1 x 350 Watts
Mono, 2 ohms: 1 x 500 Watts
T.H.D. + Noise: <0.017% @ 4 ohms.

  • SymbiLink™ Balanced Inputs
  • On-Board, Full Function DSP
  • Intelligent Rail Voltage Control
  • Plays from ½ ohm to 4 ohm Stereo Loads
  • USB Input for PC Control
  • Optional DRC-SL In-Dash Remote Control
  • Optional Digital Programming Network
  • Ducted Flow Cooling
  • ZAPCO EHVC Output Circuitry
  • Heavy-Duty, High-Current, Insulated Terminal Blocks
  • Space Saving Flush Wiring Connections
  • Heavy-Duty Mini ANL Fuse
  • Gate Drive Boost Circuit
  • High-Current Bipolar Outputs
  • Optically Isolated MOSFET Power Supply
  • Quality ZAPCO construction
SymbiLink cables allow you to connect ZAPCO audio components and convert a standard unbalanced audio signal into the fully balanced domain usually only reserved for the type of expensive professional equipment found in recording studios or at your local concert venue. With this type of cabling in your component system it virtually becomes immune to electrical interference in the surrounding environment and much less susceptible to signal degradation over long cable runs. It is for this reason that balanced signal cables are common in professional or industrial applications. ZAPCO has made this technology available for your car. ZAPCO engineers also discovered that a significant amount of low frequency distortion was caused by the pulsating DC current in the automobile chassis, and amplifier power wiring. ZAPCO's balanced SymbiLink technology completely eliminates this distortion.

Download manual: click here
Brand New Factory Sealed!
more info
Lanzar Optidrive Opti1400D 1300 Watt Mono Block Digital Competition Class Amplifier
Lanzar Optidrive Opti1400D 1300 Watt Mono Block Digital Competition Class Amplifier
Our Price: $275.00

  • 500 Watts RMS Power @ 4 Ohms
  • 800 Watts RMS Power @ 2 Ohms
  • 1000 Watts RMS Power @ 1.3 Ohms
  • 1300 Watts Max Power @ 1.3 Ohms
  • Mono Block Subwoofer Amplifier
  • 1 Ohm Stable
  • MOSFET Power Supply
  • PWM (Pulse-Width-Modulated) System
  • Double Sided Epoxy PCB Circuit Board
  • Gold Plated RCA Inputs
  • Custom Terminal Block for Speaker Connections
  • Thermal, Overload Short Protection
  • Remote Bass Control
  • Soft Turn On/Off
  • THD @ 1Watt/4 Ohm: 0.1%
  • S/N Ratio: 90dB
  • Frequency Response: 15Hz - 150Hz (+/-3dB)
  • Damping Factor @ 20Hz/4 Ohms: 400
  • Variable Low Pass Filter: 50Hz-150Hz, 24dB/Octave
  • Variable Subsonic Filter: 15Hz-40Hz, 24dB/Octave
  • Variable Bass Boost: 0 to +18dB
  • Phase Shift Control: 0 to 180
  • Input Sensitivity: 200mV ~ 8V
  • Input Impedance: 10k Ohm
  • Line Output Impedance: 100 Ohm
  • Fuse Rating: 30A x 4
  • Dimensions: 10.08'' (W) x 2.12'' (H) x 14.96'' (L)
Product Manual: Click Here
more info
Lanzar Optidrive Opti2000D Watt Mono Block Digital Competition Class Amplifier
Lanzar Optidrive Opti2000D Watt Mono Block Digital Competition Class Amplifier
Our Price: $299.00

  • 700 Watts RMS Power @ 4 Ohms
  • 1100 Watts RMS Power @ 2 Ohms
  • 1600 Watts RMS Power @ 1.3 Ohms
  • 2000 Watts Max Power @ 0.5 Ohms
  • 4000 Watts Bridge Max Power @ 2 Ohms
  • Mono Block Subwoofer Amplifier
  • 0.5 Ohm Stable
  • MOSFET Power Supply
  • PWM (Pulse-Width-Modulated) System
  • Double Sided Epoxy PCB Circuit Board
  • Gold Plated RCA Inputs
  • Custom Terminal Block for Speaker Connections
  • Thermal, Overload Short Protection
  • Remote Bass Control
  • Soft Turn On/Off
  • THD @ 1Watt/4 Ohm: 0.1%
  • S/N Ratio: 90dB
Product Manual: Click Here
  • Frequency Response: 15Hz - 150Hz (+/-3dB)
  • Damping Factor @ 20Hz/4 Ohms: 400
  • Low Pass Filter: 50Hz-150Hz, 24dB/Octave
  • Variable Subsonic Filter: 15Hz-40Hz, 24dB/Octave
  • Variable Bass Boost: 0 to 18dB
  • Variable Phase Control: 0 to 180
  • Input Sensitivity: 200mV ~ 8V
  • Input Impedance: 10k Ohm
  • Line Output Impedance: 100 Ohm
  • Fuse Rating: 30A x 6
  • Dimensions: 10.08'' (W) x 2.12'' (H) x 19.1'' (L)
more info
Zapco DC1100.1 DC Reference Mono Channel Amp with On-Board Digital Processing
Zapco DC1100.1 DC Reference Mono Channel Amp with On-Board Digital Processing
Our Price: $399.00

Stereo, 4 ohms: 1 x 820 Watts
Stereo, 2 ohms: 1 x 1100 Watts
T.H.D. + Noise: <0.015% @ 4 ohms

  • SymbiLink™ Balanced Inputs
  • On-Board, Full Function DSP
  • Intelligent Rail Voltage Control
  • Plays from ½ ohm to 4 ohm Stereo Loads
  • USB Input for PC Control
  • Optional DRC-SL In-Dash Remote Control
  • Optional Digital Programming Network
  • Ducted Flow Cooling
  • ZAPCO EHVC Output Circuitry
  • Heavy-Duty, High-Current, Insulated Terminal Blocks
  • Space Saving Flush Wiring Connections
  • Heavy-Duty Mini ANL Fuse
  • Gate Drive Boost Circuit
  • High-Current Bipolar Outputs
  • Optically Isolated MOSFET Power Supply
  • Quality ZAPCO construction
SymbiLink cables allow you to connect ZAPCO audio components and convert a standard unbalanced audio signal into the fully balanced domain usually only reserved for the type of expensive professional equipment found in recording studios or at your local concert venue. With this type of cabling in your component system it virtually becomes immune to electrical interference in the surrounding environment and much less susceptible to signal degradation over long cable runs. It is for this reason that balanced signal cables are common in professional or industrial applications. ZAPCO has made this technology available for your car. ZAPCO engineers also discovered that a significant amount of low frequency distortion was caused by the pulsating DC current in the automobile chassis, and amplifier power wiring. ZAPCO's balanced SymbiLink technology completely eliminates this distortion.

Download manual: click here
more info
Lanzar Optidrive Opti4000D 4000Watt Mono Block Digital Competition Class Amplifier
Lanzar Optidrive Opti4000D 4000Watt Mono Block Digital Competition Class Amplifier
Our Price: $549.00

  • 1 x 2000 Watts RMS @ 4 OHMS
  • 1 x 3000 Watts Max @ 2 OHMS
  • 1 x 4000 Watts RMS @ 1 OHM
  • Mono Block Subwoofer BIG POWER Amplifier
  • 1 Ohm Stable
  • MOSFET Power Supply
  • PWM(Pulse-Width-Modulated) System
  • Glass Epoxy PCB
  • Gold plated RCA Inputs
  • Gold plated Line outs
  • Custom Terminal Block for Speaker Connections
  • Thermal,Overload Short Protection
  • Variable Low pass Filter (50Hz~150Hz,24dB/Octave)
  • Variable Subsonic Filter (15Hz~40Hz,24dB/Octave)
  • Phase Control 0-180 degree
  • Remote Bass Control
  • Input Impedance:10K Ohms
  • Soft Turn On/Off
  • THD: 0.1%.
  • S/N Ratio: 90B
  • Input Sensitivity: 200mv~4V
  • Freq. Response: 20Hz~250Hz
  • Dimensions :10.08'' (W) x 2.12'' (H) x 23.3'' (L)
Product Manual: Click Here
more info